It is a big responsibility, and it is very important to keep your essential electrical equipment in working condition. Electric maintenance is a necessity in our home, but it can be extremely dangerous if not handled properly. The majority of electrical-related accidents in homes are caused by the lack of knowledge about electrical safety and know-how.
Keep in mind that all maintenance of electrical appliances must be planned in an effective way for both economic and energy efficiency.
Tips to keep your essential electrical equipments in working condition:
Always read the manual
The most common error that people make is failing to read the manual that comes with the electrical appliance. Before handling or dealing with any electrical equipment, read the manual because there is no better way to gain insight than by reading the manual.
When it comes to the proper care of any electrical appliance, read the manual because you will learn about all the regular maintenance tasks that must be performed and when they should be completed. You’ll also discover whether you can do the maintenance yourself or if it needs to be done by a professional.
Ensure that all your electrical equipment are clean
Electrical appliances that are dirty or clogged with dirt and debris work harder. This can reduce the life of the appliance and, due to overheating, can result in burning and permanent damage to the appliance.
Some appliances have exhaust fans that collect dirt and become jammed with it. It is critical to clean the electrical equipment to keep it in working order and to increase its longevity, thereby lowering the risk of overheating or other mishaps in the house.
Check all the electrical appliances for malfunction
One of the most common causes of short circuits or poor electrical equipment conditions is a faulty or improperly plugged-in socket. As a result, all the electrical equipment in the house should be inspected for flaws. Remember to turn off the main power when performing major electrical maintenance activities. Power switched on while working on the home’s electrical system can be a major source of shocks and accidents. Always turn off the plug point and work when performing small power outlet maintenance.
Intervention of an expert
Even if you maintain your equipment on a regular basis, it is feasible that it will break at some point or need repair. Electrical equipment can be repaired on your own at times, but it is dangerous if not handled properly. When doing your own electrical work, use extra care. In the case of doubt, seek the advice of a professional. Professional electricians receive years of training and on-the-job experience before beginning their careers as electricians. If an issue appears to be out of control and requires more intervention, always contact a certified electrician.
Handle machines with care
There is a common misconception that slapping or hitting electrical equipment will improve its performance. While this may be true in some rare cases, pounding on appliances is likely to cause more harm than good. The more you treat your electrical appliances like delicate machinery, the longer they will remain in good working condition.
Avoid using electrical equipment near water or in a damp surrounding
Keep in mind and make it a policy not to use electrical equipment in damp environments or near water. Keep your electrical equipment in a dry, safe place at all times. Drinks of any kind should be avoided when using electrical equipment because there is a risk of spilling liquid on the appliance, which can deteriorate it and make it dangerous.
Keep electrical appliances away from children and pets
Keep electrical appliances out of reach of children and pets, as they may play with them or chew the cord. Electronic equipment such as heaters, blenders, electric kettles, toasters, personal care electronics, and so on should be kept out of reach of children until they are old enough to operate them properly and understand electrical safety at home.
Cords should not be wrapped
Avoid wrapping cords tightly around objects, as this can cause the cord to stretch or overheat. To prevent damage to the cord’s insulation and wires, never place it on a hot surface. Keep small and essential electrical equipment in its original packaging because dirt and dust can easily enter the inside of the appliance and cause damage to it.
It is critical to prioritize and keep your essential electrical equipment in working condition to ensure the safety of all electrical equipment in your home. Hire a professional electrician to handle the job so that it is up to code and all your electrical equipment is in good working order.
Checkout MyLA’s Electrician Services Price List in India:
| Services | Price (in INR) |
| Electrician on Demand (Per Hour Basis | Procurement Time Also Taken In Account | Minor Repair Works Which Are Not Listed) |
299 |
| Geyser (Installation | <10 lt, Installation | 10lt to 15 lt, Installation | >15 lt, Un-Installation | Upto 20lt | Waiting Charges Applied After 60 Mins As Per Rate Card) |
300-499 |
| Inverter (Inverter Servicing | One Unit, Inverter Installation | Single Battery | One Unit, Inverter Installation | Double Battery | One Unit, Inverter Fuse Repair | One Unit) |
99-499 |
| Switch & Socket (AC Switch Board | Installation | Wiring As Per Rate Card | One Unit, Electrical Switch Board Installation | Upto 6 Switches, Switch Board Repair | Upto 6 Switches, Switch/Socket Replacement | One Unit) |
79-299 |
| Television (Installation | 19″ to 29″ | One Unit, Installation | 32″ to 42″ | One Unit, Installation | 45″ to 55″ | One Unit, Home Theatre Installation | Open Wiring From TV To Speakers | TV Installation Extra) |
399-649 |
| Wiring (Three Phase) (New Wiring | Upon Inspection | Visiting Charges Applied | Adjusted If Quote Accepted) |
79 |
| MCB (MCB Installation | Single Pole | One Unit, MCB Installation | Two Pole | One Unit, MCB Installation | Three Pole | One Unit, MCB Installation | Four Pole | One Unit, Change-Over Switch Installation | 3 Phase | One Unit) |
149-399 |
| Meter BOX (Sub-Meter Installation | Wiring As Per Rate Card | One Unit, Three Phase Work | Upon Inspection | Visiting Charges Applied | Adjusted If Quote Accepted, Servicing, Meter Box Shifting | Single Phase | Wiring As Per Rate Card | One Unit) |
79-499 |